|
Veteran |
Joined: Wed Aug 15, 2001 12:01 am Posts: 2869 Location: Ventura, California, USA
|
Make a plate with a tube that accepts the spindle and attach that to the bottom of your carts. You can use either wood or metal for this but i's your only real choice.
Depending on the design of the cart, you can use a wood triangle in each corner with a hole bored into it for the spindles. Alternately, if you can't do that, weld a plate to the outside of the frame (if it's a metal frame that is) and put the spindle there. If you can't do either then drill the cart frame and weld in a tube (again, if its a metal frame).
If you can't do any of that, buy new casters.
|
|