|
Veteran |
|
Joined: Mon Dec 29, 2003 1:01 am Posts: 2032 Location: Seabrook, Texas
|
Finally got around to vacuuming some serious sawdust, several huge piles of planer shavings. First I emptied my shop vac and cleaned the filter, then went after the piles of shavings. Checked the shop vacuum container and filter afterwards and they were totally clean. So, I love it although a couple of things you have to keep in mind. Regardless of what they say it will easily tip over if there is any obstruction on the floor and you have to watch that it doesn't get too far from the shop vac or the hose will pull out but this is a very minor issue compared to cleaning the shop vac and filter. If my shop vac rolled as easily as this thing I probably would not have the problem of the hose pulling out. I highly recommend it and by the way my affiliation with Rockler is that I buy things from them once in awhile. By the way, don't you hate to see all that money going down the drain in planer shavings? So far I have filled up two 39 gallon trash bags and have a ways to go yet.
|
|